Y83W-2000 horizontal metal briquetting press and finished briquettes at a customer site
Chip recovery system

Give loose chips a dense, controlled form for storage and remelting

Machining chips and turnings can take up unstable space and are difficult to store, weigh or feed back into a melting process. A briquetting line gives the recovered material a repeatable, denser form.

For standard Y83W horizontal presses, the published shipping configuration includes the press, storage hopper and chain conveyor. A shredder, chip dryer, oil chiller and other line equipment are selected after the material and site conditions are reviewed.

  • Horizontal pressingFully enclosed hydraulic structure with selectable die formats
  • Continuous feedPublished line combines press, storage hopper and inclined conveyor
  • Automatic controlPLC and touchscreen HMI monitor pressure and temperature
Read the Machining & Chip Briquetting application guide
Material scope

Match the press to the actual chip stream

The die, feed arrangement and connected power follow the metal type, chip or turning form and required output. A headline tonnage alone is not enough to select the line.

  • Machining, turning and grinding operations with a steady chip or turnings stream
  • Sites that need a denser, easier-to-handle product for storage, trading or remelting
  • Installations where feed, discharge and automation need to work as one line

Steel turnings

Machining turnings processed to the selected press and die format

Aluminium chips

Aluminium chip and swarf streams from machining operations

Cast iron borings

Cast iron borings and selected fine machining chips

Copper and brass chips

Selected copper and brass chip streams reviewed for the target briquette

Typical process

From material intake to finished output

The equipment and controls are selected after the complete flow is understood.

  1. 01

    Material intake

    Collect the chip stream in a storage hopper sized around delivery method, shift pattern and available floor area.

  2. 02

    Controlled feed

    Use the conveyor arrangement defined for the press and layout, with the feed rate coordinated with the briquetting cycle.

  3. 03

    Size preparation

    Add an upstream shredder when long turnings, bird nests or mixed scrap exceed the selected press feed envelope.

  4. 04

    Moisture preparation

    Review oil, coolant and moisture in the stream; a chip dryer can be included where the material condition requires it.

  5. 05

    Briquetting

    Select a Y83W horizontal press and die size from the published model matrix, material scope and output target.

  6. 06

    Discharge and cooling

    Plan briquette collection around the selected press discharge arrangement and include hydraulic-oil cooling where the duty requires it.

Stacked metal chip briquettes produced by a Y83W-2000 horizontal briquetting press
The output

A repeatable briquette makes recovered chips easier to handle

Loose machining chips can vary in bulk density and occupy unstable storage space. Cold pressing forms the selected material into a round briquette with a defined handling format.

The useful result depends on the material, die diameter and press setting. These are reviewed together with the finished-briquette handling method before the line is specified.

  • Defined round briquette format
  • Material prepared for storage, weighing or remelting
  • Published die range matched to the selected model
Equipment shortlist

Representative models

Published model data provides a starting point. Material trials and engineering review confirm the final machine and line configuration.

ModelPressing forceMotor powerCycle timeSelection note
Y83W-630630 t / 6,300 kN120 kW total≤20 sCompact Y83W configuration for lower-tonnage horizontal installations.
Y83W-12501,250 t / 12,500 kN275 kW total≤22 sHigher-capacity horizontal line with a published Ø200–310 mm die range.
Y83W-20002,000 t / 20,000 kN450 kW total≤25 sHeavy-output horizontal press for large chip-processing installations.
Before quotation

What we confirm with you

Send the material details and site constraints. Our engineers will return a practical configuration with the equipment scope and quotation basis.

Discuss your line
  • Metal type and mix: aluminium, steel, copper or mixed chips
  • Chip or turning dimensions and whether upstream shredding is needed
  • Input rate, operating shifts and required briquette output
  • Oil, coolant and moisture condition of the material
  • Target briquette diameter and finished-material handling
  • Available line length, maintenance access, power supply and automation scope