Metal chip and turning processing
Designed for cold briquetting of aluminium, steel and copper machining chips, turnings and borings. The published feed scope is generally up to 50 mm long × 3 mm thick.
Y83L-800 Vertical Metal Briquetting Press
The Y83L-800 is a 800-ton vertical pre-pressing enclosed hydraulic metal briquetting press for ferrous and non-ferrous machining chips. A pre-pressing cylinder densifies the material before it enters the enclosed die cavity; the main cylinder then cold-compacts it into dense round briquettes, while cutting fluid is squeezed out for recovery.
Selectable Ø160–230 mm dies match briquette size and output to the material. PLC and touchscreen HMI control provide automatic operation, pressure and temperature monitoring, fault indication and process records.
Cold-presses metal chips and turnings into dense briquettes.
Selectable dies adapt briquette size and output to the material and target density.
Turns loose ferrous and non-ferrous machining chips into dense briquettes for easier handling and remelting, while cutting fluid is recovered during pressing.

Y83 Metal Briquetting Press Series · Y83L
800 t (8,000 kN)
Output changes with the selected die
Chips, turnings and borings; generally up to 50 mm long × 3 mm thick
Approx. 28,000 kg; 40'OT × 2 + 40'FR × 1; one machine
Designed for cold briquetting of aluminium, steel and copper machining chips, turnings and borings. The published feed scope is generally up to 50 mm long × 3 mm thick.
The machine occupies a 5 × 7 m footprint with an overall envelope of 5 × 7 × 6 m.
Range across the published die configurations below. Final output depends on material form, bulk density, die selection and feed conditions.
| Main pressing force | 800 t (8,000 kN) |
|---|---|
| Cycle time | ≤22 s no-load |
| Operation | PLC automatic operation with HMI |
| Materials | Aluminium, steel and copper chips, turnings and borings |
|---|---|
| Maximum material size | Generally up to 50 mm long × 3 mm thick |
| Main motor | 55 kW × 2 (110 kW total) |
|---|---|
| Power supply | 200–480 V / 3 Ph / 50–60 Hz or customizable |
| Hydraulic oil | Approx. 4,000 L |
Each row is a published die size. Capacity changes with material and die selection; final configuration is confirmed against the material sample and required output.
| Briquette die | Briquette height | Aluminium | Steel | Copper | Source row |
|---|---|---|---|---|---|
| Ø160 mm | ≈ 136 mm | ≤ 1,100 kg/h | ≤ 2,200 kg/h | ≤ 2,800 kg/h | NO. 191 |
| Ø180 mm | ≈ 153 mm | ≤ 1,400 kg/h | ≤ 3,000 kg/h | ≤ 3,600 kg/h | NO. 192 |
| Ø200 mm | ≈ 170 mm | ≤ 1,900 kg/h | ≤ 4,100 kg/h | ≤ 5,000 kg/h | NO. 193 |
| Ø220 mm | ≈ 187 mm | ≤ 2,400 kg/h | ≤ 5,200 kg/h | ≤ 6,400 kg/h | NO. 194 |
| Ø230 mm | ≈ 188.6 mm | ≤ 2,700 kg/h | ≤ 5,800 kg/h | ≤ 7,000 kg/h | NO. 195 |
Capacity figures are published upper values for the selected material and die. Actual output depends on chip form, bulk density, feed method and operating conditions. Final configuration is confirmed before quotation.
Use these figures for early site planning. Confirm access routes, lifting equipment and unloading arrangements against the final released drawing.
200–480 V / 3 Ph / 50–60 Hz or customizable
Optional storage hopper, chain conveyor, shredder and oil chiller
Document requests are fulfilled against the current released edition for the selected configuration.
Series overview covering vertical and horizontal briquetting structures, material flow and the available configuration families.
Current model technical data, including pressure, die configurations, material limits, installation data and shipping arrangement.
Operation sequence, safety information, maintenance guidance and common fault procedures for Y83 presses.
Send your material type and daily tonnage — we'll come back with a recommended configuration and pricing within 24 hours.
Prefer to talk? +86-15950122559
Briquetting PressY83-150 Vertical Metal Briquetting Press
Briquetting PressY83-250 Vertical Metal Briquetting Press
Briquetting PressY83-360 Vertical Metal Briquetting Press