Briquetting Press

Y83L-500

Y83L-500 Vertical Metal Briquetting Press

The Y83L-500 is a 500-ton vertical pre-pressing enclosed hydraulic metal briquetting press for ferrous and non-ferrous machining chips. A pre-pressing cylinder densifies the material before it enters the enclosed die cavity; the main cylinder then cold-compacts it into dense round briquettes, while cutting fluid is squeezed out for recovery.

Selectable Ø110–180 mm dies match briquette size and output to the material. PLC and touchscreen HMI control provide automatic operation, pressure and temperature monitoring, fault indication and process records.

Key advantages

500 Ton Pressing Force

Cold-presses metal chips and turnings into dense briquettes.

Ø110–180 mm Die Range

Selectable dies adapt briquette size and output to the material and target density.

Chip Recycling & Remelting

Turns loose ferrous and non-ferrous machining chips into dense briquettes for easier handling and remelting, while cutting fluid is recovered during pressing.

Y83L-500 vertical metal briquetting press

Y83 Metal Briquetting Press Series · Y83L

Vertical · pre-pressing enclosed

Choose Y83L when longer or fluffier turnings need a more consistent charge within a compact vertical installation.
Compare all Y83 family types
Pressing force500 t

500 t (5,000 kN)

Briquette dieØ110–180 mm

Output changes with the selected die

Materials handledAluminium, steel & copper

Chips, turnings and borings; generally up to 30 mm long × 2 mm thick

Installation5 × 5 m

Approx. 13,000 kg; 40'HC × 1; one machine

Where Y83L-500 fits

Metal chip and turning processing

Designed for cold briquetting of aluminium, steel and copper machining chips, turnings and borings. The published feed scope is generally up to 30 mm long × 2 mm thick.

Compact vertical installation

The machine occupies a 5 × 5 m footprint with an overall envelope of 5 × 5 × 4.5 m.

Published output by material

Aluminium300–1,200 kg/h
Steel700–2,600 kg/h
Copper800–3,100 kg/h

Range across the published die configurations below. Final output depends on material form, bulk density, die selection and feed conditions.

Technical Specifications

Pressure and cycle

Main pressing force500 t (5,000 kN)
Cycle time≤22 s no-load
OperationPLC automatic operation with HMI

Feed and material

MaterialsAluminium, steel and copper chips, turnings and borings
Maximum material sizeGenerally up to 30 mm long × 2 mm thick

Drive and utilities

Main motor30 kW × 2 (60 kW total)
Power supply200–480 V / 3 Ph / 50–60 Hz or customizable
Hydraulic oilApprox. 1,800 L

Key Features

  • Vertical pre-pressing enclosed structure
  • 30 kW × 2 (60 kW total) hydraulic drive
  • PLC automatic operation with touchscreen HMI
  • Cutting-fluid recovery during briquetting
  • Executes JB/T 3818-2014 and JB/T 8494.2-2012
  • Electrical to GB 5226.1-2008 / IEC 60204-1:2005

Published Y83L-500 die configurations

Each row is a published die size. Capacity changes with material and die selection; final configuration is confirmed against the material sample and required output.

Briquette dieBriquette heightAluminiumSteelCopperSource row
Ø110 mm≈ 88 mm≤ 300 kg/h≤ 700 kg/h≤ 800 kg/hNO. 158
Ø120 mm≈ 96 mm≤ 400 kg/h≤ 900 kg/h≤ 1,100 kg/hNO. 159
Ø130 mm≈ 104 mm≤ 500 kg/h≤ 1,100 kg/h≤ 1,300 kg/hNO. 160
Ø140 mm≈ 112 mm≤ 600 kg/h≤ 1,300 kg/h≤ 1,600 kg/hNO. 161
Ø150 mm≈ 120 mm≤ 700 kg/h≤ 1,600 kg/h≤ 1,900 kg/hNO. 162
Ø160 mm≈ 128 mm≤ 900 kg/h≤ 1,900 kg/h≤ 2,300 kg/hNO. 163
Ø180 mm≈ 144 mm≤ 1,200 kg/h≤ 2,600 kg/h≤ 3,100 kg/hNO. 164

Capacity figures are published upper values for the selected material and die. Actual output depends on chip form, bulk density, feed method and operating conditions. Final configuration is confirmed before quotation.

Installation and shipping

Use these figures for early site planning. Confirm access routes, lifting equipment and unloading arrangements against the final released drawing.

Footprint
5 × 5 m
Overall dimensions
5 × 5 × 4.5 m
Machine weight
Approx. 13,000 kg
Container loading
40'HC × 1; one machine

Customization Options

Voltage

200–480 V / 3 Ph / 50–60 Hz or customizable

Line Configuration

Optional storage hopper, chain conveyor, shredder and oil chiller

Processed Materials

Aluminum chipsSteel turningsCast iron boringsCopper shavings

Y83L-500 documents

Document requests are fulfilled against the current released edition for the selected configuration.

View all downloads
Series Product Introduction

Y83 Series Product Introduction

Series overview covering vertical and horizontal briquetting structures, material flow and the available configuration families.

Language
English
Version
Current edition
Edition
2026-10-21
Request this document
Technical Datasheet

Y83L-500 Technical Datasheet

Current model technical data, including pressure, die configurations, material limits, installation data and shipping arrangement.

Language
English
Version
A/1
Edition
2026-10-30
Download
Operation and Maintenance Manual

Y83 Operation and Maintenance Manual

Operation sequence, safety information, maintenance guidance and common fault procedures for Y83 presses.

Language
English / Chinese
Version
Latest released manual
Edition
2026-10-21
Request this document
No-obligation quotation

Request a Quote for the Y83L-500

Send your material type and daily tonnage — we'll come back with a recommended configuration and pricing within 24 hours.

Prefer to talk? +86-15950122559

Include these details

  • Metal type and form: aluminium, steel or copper chips, turnings or borings
  • Maximum piece length and thickness
  • Required output per hour or per shift
  • Target briquette diameter and density
  • Available voltage, frequency and power capacity
  • Installation footprint, lifting equipment and destination