Covered two-way compression
Side compression and main compression work with a hydraulic cover for light, mixed and springy scrap.
Y81T-315 Metal Baler
The Y81T-315 is a 315-ton horizontal metal baler for light, bulky and mixed scrap. Side compression and main compression form dense bales, while the hydraulic cover helps contain springy material during charging and compression.
Published chamber and bale options let the machine be matched to feed size, finished bale handling and required throughput. The bale is discharged by side push-out, and PLC control supports automatic operation with remote control.
Two-way side and main compression turn loose scrap into dense, transportable bales.
A hydraulic cover helps control light and springy material during the compression cycle.
The finished bale is pushed out sideways so the charging area can be prepared for the next cycle.

Y81 Metal Baler Series · Y81T
315 t (3,150 kN)
10 published chamber configurations
Sheet, cans, white goods and non-ferrous scrap; generally under 3 mm
Approx. 32,000 kg; selection-specific dimensions
Exact-model photographs from the product library.

Side compression and main compression work with a hydraulic cover for light, mixed and springy scrap.
Select the charging chamber and bale format together. The configuration matrix lists every published public combination for this model.
Bales leave through a side push-out system, allowing the operator to prepare the charging area for the next cycle.
Range across the published chamber and bale configurations below. Final output depends on material form, bulk density, selected chamber and feed conditions.
| Main baling force | 315 t (3,150 kN) |
|---|---|
| Base cycle time | ≤120 s |
| Compression sequence | Side pre-compression → main compression |
| Bale ejection | Side push-out |
| Operation | PLC automatic with remote control |
| Materials | Light steel, sheet metal, cans, white goods and mixed non-ferrous scrap |
|---|---|
| Material thickness | Under 3 mm |
| Bale options | 400–600 mm |
| Published chamber configurations | 10 |
| Main motor | 69 kW |
|---|---|
| Power supply | 200–480 V / 3 Ph / 50–60 Hz or customizable |
| Hydraulic oil | Approx. 2,800 L |
Each row is a published charging chamber, bale and motor combination. Confirm material size, bale handling and cycle time together.
| Charging chamber | Bale size | Motor power | Cycle time | Aluminium | Steel | Copper | Source row |
|---|---|---|---|---|---|---|---|
| 2,000 × 1,750 × 800 mm | 400 × 400 mm | 69 kW | ≤120 s | ≤ 2,310 kg/h | ≤ 4,200 kg/h | ≤ 6,300 kg/h | NO. 70 |
| 2,000 × 1,750 × 1,000 mm | 400 × 400 mm | 45 kW × 2 | ≤130 s | ≤ 2,130 kg/h | ≤ 3,900 kg/h | ≤ 5,800 kg/h | NO. 71 |
| 2,000 × 1,750 × 1,000 mm | 450 × 450 mm | 45 kW × 2 | ≤130 s | ≤ 2,450 kg/h | ≤ 4,700 kg/h | ≤ 7,100 kg/h | NO. 72 |
| 2,500 × 1,750 × 1,000 mm | 450 × 450 mm | 45 kW × 2 | ≤150 s | ≤ 2,130 kg/h | ≤ 4,000 kg/h | ≤ 6,200 kg/h | NO. 73 |
| 2,500 × 1,750 × 1,000 mm | 500 × 500 mm | 45 kW × 2 | ≤150 s | ≤ 2,360 kg/h | ≤ 5,000 kg/h | ≤ 7,600 kg/h | NO. 74 |
| 2,500 × 2,000 × 1,200 mm | 500 × 500 mm | 45 kW × 2 | ≤160 s | ≤ 2,530 kg/h | ≤ 5,300 kg/h | ≤ 8,200 kg/h | NO. 75 |
| 2,500 × 2,000 × 1,200 mm | 500 × 500 mm | 45 kW × 2 | ≤150 s | ≤ 2,700 kg/h | ≤ 5,700 kg/h | ≤ 8,700 kg/h | NO. 76 |
| 2,500 × 2,000 × 1,200 mm | 500 × 500 mm | 37 kW × 2 | ≤180 s | ≤ 2,250 kg/h | ≤ 4,800 kg/h | ≤ 7,300 kg/h | NO. 77 |
| 3,000 × 2,500 × 1,200 mm | 600 × 600 mm | 45 kW × 2 | ≤180 s | ≤ 4,050 kg/h | ≤ 8,600 kg/h | ≤ 13,100 kg/h | NO. 78 |
| 3,000 × 2,500 × 1,200 mm | 600 × 600 mm | 45 kW × 3 | ≤130 s | ≤ 5,610 kg/h | ≤ 11,800 kg/h | ≤ 18,100 kg/h | NO. 79 |
Capacity figures are published values for the selected chamber, bale and motor configuration. Actual output depends on material form, bulk density, feed method and operating conditions. Final configuration is confirmed before quotation.
Use these figures for early site planning. Confirm access routes, lifting equipment and unloading arrangements against the final released drawing.
200–480 V / 3 Ph / 50–60 Hz or customizable
Manual loading standard; conveyor or grab feeding on request
Document requests are fulfilled against the current released edition for the selected configuration.
Series-level introduction to Y81 baler structures, compression and discharge methods, material fit and the model selection path. The current customer edition is supplied on request.
Current model technical data, including chamber and bale configurations, material limits, installation data and loading arrangement.
Operation sequence, safety information, maintenance guidance and common fault procedures for Y81 metal balers.
Send your material type and daily tonnage — we'll come back with a recommended configuration and pricing within 24 hours.
Prefer to talk? +86-15950122559
Metal BalerY81T-160 Metal Baler
Metal BalerY81T-250 Metal Baler
Metal BalerY81T-400 Metal Baler