Shredders

SSJ-850

SSJ-850 Four-Shaft Steel Turnings Shredder

The SSJ-850 is a four-shaft low-speed steel turnings shredder with a 1,800 × 1,200 mm cutting chamber and ⌀235 mm main shafts. It reduces steel turnings, shavings and machining chips into a controlled output size for downstream processing.

2 motors and JSJ-850 reducers drive the cutting shafts through flexible couplings. Published steel throughput is 15–20 t/h, with an output size of 60–150 mm.

These SSJ models are normally positioned upstream of a metal-chip briquetting line, with a chip dryer included where the material requires it.

Key advantages

1,800 × 1,200 mm Cutting Chamber

Model-specific chamber sizing for the feed form and required downstream output.

Four-shaft Cutting System

⌀235 mm shafts and 204 pcs rotor blades provide low-speed, high-torque size reduction.

15–20 t/h Steel Throughput

Published output is 15–20 t/h; final throughput depends on material form and feed method.

SSJ-850 four-shaft steel turnings shredder

DSSJ / SSJ Steel Shredder Series · Steel Turnings SSJ

Four-shaft · low-speed cutting · 1,800 × 1,200 mm chamber

Choose SSJ-650 / 750 / 850 for dedicated steel turnings size reduction ahead of a chip dryer or metal briquetting press.
Compare all DSSJ family types
Cutting chamber1,800 × 1,200 mm

Four-shaft · 4 pcs main shafts

Steel throughput15–20 t/h

Published value; confirm against material form

Motor power45 kW × 2 (60 HP × 2)

2 motors

Base installation3 × 4 m

Approx. 9,500 kg; 4 × 2.2 × 2.1 m

Where SSJ-850 fits

Steel turnings size reduction

A 1,800 × 1,200 mm cutting chamber and 4 pcs-shaft cutter arrangement prepare steel turnings, shavings and machining chips for downstream processing.

Front-end of a metal briquetting line

SSJ-650 / 750 / 850 are normally paired with a metal briquetting press. A chip dryer is added where the turning stream requires it, and feed/discharge are sized for the complete line.

Model-specific cutting arrangement

⌀235 mm shafts carry 204 pcs rotor blades; fixed-blade count is 17 pcs. Structure and cutter data must be checked by exact model.

Technical Specifications

Feed and cutting chamber

StructureFour-shaft
Cutting chamber1,800 × 1,200 mm
Hopper opening2,200 × 2,200 mm
Main shaft diameter⌀235 mm
Main shafts4 pcs
Rotor blade size130 × 80 × 25mm
Rotor / stator blades204 pcs / 17 pcs
Blade materialNM500 Wear-Resistant Steel

Drive and published output

Motor power45 kW × 2 (60 HP × 2)
Motor count2 motors
Motor speed970 r/min
ReducerJSJ-850 reducers
Shaft speed10–20 r/min
Output size60–150 mm
Steel throughput15–20 t/h

Operation and maintenance

Operation modeManual & Automatic Operation
Power supply200–480 V / 3 Ph / 50–60 Hz or customizable
Gear oilApprox. 400 L
Drive couplingFlexible Coupling Drive

Key Features

  • Four-shaft low-speed, high-torque cutting system
  • 4 pcs main shafts at ⌀235 mm
  • 204 pcs rotor blades and 17 pcs stator blades
  • 45 kW × 2 (60 HP × 2) drive through JSJ-850 reducers and flexible couplings
  • 60–150 mm nominal output size
  • Manual & Automatic Operation

Installation and shipping

Use these figures for early site planning. Confirm access routes, lifting equipment and unloading arrangements against the final released drawing.

Footprint
3 × 4 m
Overall dimensions
4 × 2.2 × 2.1 m
Machine weight
Approx. 9,500 kg
Container loading
20'DC × 1; one machine
Layout note
Allow clear access for feed handling, discharge, maintenance and cutter access.

Customization Options

Voltage

200–480 V / 3 Ph / 50–60 Hz or customizable

Material Handling

Feed and discharge arrangements are selected around the material form and downstream line.

Control

PLC-based automatic and remote-control configurations are confirmed by project.

Processed Materials

Steel turnings and shavingsSteel machining chipsSteel borings

SSJ-850 documents

Document requests are fulfilled against the current released edition for the selected configuration.

View all downloads
Series Product Introduction

DSSJ / SSJ Series Product Introduction

Series-level introduction to compact MDSSJ shredders and production SSJ shredders, including feed form, shaft and cutter arrangement, drive selection and downstream integration. The current customer edition is supplied on request.

Language
English
Version
Current released edition
Edition
2026-10-30
Request this document
Technical Datasheet

SSJ-850 Technical Datasheet

Current model technical data for the cutting chamber, shaft and blade arrangement, drive, published output, installation and container loading.

Language
English
Version
A/1
Edition
2026-10-30
Download
Operation and Maintenance Manual

DSSJ / SSJ Operation and Maintenance Manual

Operation sequence, safety information, maintenance guidance and common fault procedures for MDSSJ and SSJ shredders.

Language
English / Chinese
Version
Latest released manual
Edition
2026-10-30
Request this document
No-obligation quotation

Request a Quote for the SSJ-850

Send your material type and daily tonnage — we'll come back with a recommended configuration and pricing within 24 hours.

Prefer to talk? +86-15950122559

Include these details

  • Material type, form and maximum piece size
  • Bulk density and whether bundles need pre-loosening
  • Required output per hour or per shift
  • Required discharge size and downstream machine
  • Feed and discharge arrangement
  • Available voltage, frequency and connected power
  • Installation footprint, lifting equipment and destination