Blade sized to the scrap section
Published capacity is ≤ 35 × 200 mm for steel plate, ≤ Ø40 mm for round bar and ≤ 25 × 25 mm for square bar. Compare the actual section with this envelope before choosing tonnage.
Q43-100 Alligator Shear
The Q43-100 is a 100-ton hydraulic alligator shear for cold-cutting scrap profiles, pipes and structural metal. A fixed lower blade and moving upper shear arm work with a hold-down cylinder that clamps the material before the cut.
The 600 mm blade and ≈ 320 mm maximum blade opening set the working envelope. Manual, automatic and foot-pedal single-cut modes support both batch processing and one-piece control.
Nominal blade-edge cutting force is 100 t (1,000 kN); the main cylinder drives the moving arm through a lever amplification mechanism.
12.5 t (125 kN) hold-down force secures the workpiece before the moving blade enters the cut.
Use automatic cycling for repeat work or the foot pedal for controlled single cuts.

Scrap Shear Series · Q43 Standard
100 t (1,000 kN)
Maximum opening ≈ 320 mm
Round ≤ Ø40 mm; square ≤ 25 × 25 mm
8–10 cuts/min
Exact-model photographs from the product library.


Published capacity is ≤ 35 × 200 mm for steel plate, ≤ Ø40 mm for round bar and ≤ 25 × 25 mm for square bar. Compare the actual section with this envelope before choosing tonnage.
The hold-down cylinder clamps the workpiece before the moving blade enters the cut, reducing lifting and kick-back during shearing.
Use automatic cycling for repeated pieces, manual control for setup and the foot pedal for controlled single cuts.
| Nominal blade-edge force | 100 t (1,000 kN) |
|---|---|
| Blade length | 600 mm |
| Maximum blade opening | ≈ 320 mm |
| Shear speed | 8–10 cuts/min |
| Steel plate | ≤ 35 × 200 mm |
|---|---|
| Round steel bar | ≤ Ø40 mm |
| Square steel bar | ≤ 25 × 25 mm |
| Material thickness | Under 35 mm |
| Hold-down force | 12.5 t (125 kN) |
| Operation | Manual & Automatic Operation |
| Main motor | 7.5 kW |
|---|---|
| Main hydraulic pump | 40 mL/r × 1 |
| Hydraulic oil | Approx. 200 L |
| Power supply | 200–480 V / 3 Ph / 50–60 Hz or customizable |
Use these figures for early site planning. Confirm access routes, lifting equipment and unloading arrangements against the final released drawing.
200–480 V / 3 Ph / 50–60 Hz or customizable
Manual loading standard; feed or discharge conveyor on request
Document requests are fulfilled against the current released edition for the selected configuration.
Series-level introduction to Q43 alligator shears and CCD catalytic decanners, including structure, cutting action, hold-down method, loading and model selection. The current customer edition is supplied on request.
Current model technical data, including blade capacity, material section limits, drive, installation dimensions and container loading.
Operation sequence, safety information, maintenance guidance and common fault procedures for Q43 alligator shears and CCD catalytic decanners.
Send your material type and daily tonnage — we'll come back with a recommended configuration and pricing within 24 hours.
Prefer to talk? +86-15950122559
Shearing MachineQ43-20 Alligator Shear
Shearing MachineQ43-40 Alligator Shear
Shearing MachineQ43-63 Alligator Shear