Shredders

MDSSJ-400

MDSSJ-400 Two-Shaft Shredder

The MDSSJ-400 is a two-shaft low-speed shredder with a 400 × 360 mm cutting chamber and ⌀60 mm main shafts. It prepares metal chips, turnings and light scrap for briquetting, baling or further separation.

1 motor and K87 reducer drive the cutting shafts through flexible couplings. Published steel throughput is ≤230 kg/h, with an output size of approximately 20 mm.

Key advantages

400 × 360 mm Cutting Chamber

Model-specific chamber sizing for the feed form and required downstream output.

Two-shaft Cutting System

⌀60 mm shafts and 32 pcs rotor blades provide low-speed, high-torque size reduction.

≤230 kg/h Steel Throughput

Published output is ≤230 kg/h; final throughput depends on material form and feed method.

MDSSJ-400 compact two-shaft metal chip shredder

DSSJ / SSJ Steel Shredder Series · Compact MDSSJ

Two-shaft · low-speed cutting · 400 × 360 mm chamber

Choose MDSSJ when compact installation and lower-volume chip or light-scrap processing are the priority.
Compare all DSSJ family types
Cutting chamber400 × 360 mm

Two-shaft · 2 pcs main shafts

Steel throughput≤230 kg/h

Published value; confirm against material form

Motor power5.5 kW × 1 (7.5 HP × 1)

1 motor

Base installation1610x720mm

Approx. 500 kg; 1,610 × 720 × 1,450 mm

Where MDSSJ-400 fits

Compact chip processing

A 400 × 360 mm chamber and 2 pcs-shaft cutter arrangement size metal chips and small turnings for compact recycling operations.

Front-end line integration

Use the shredder upstream of a chip dryer, briquetting press, baler or separation stage. Feed and discharge are selected around the complete line.

Model-specific cutting arrangement

⌀60 mm shafts carry 32 pcs rotor blades; fixed-blade count is 32 pcs. Structure and cutter data must be checked by exact model.

Technical Specifications

Feed and cutting chamber

StructureTwo-shaft
Cutting chamber400 × 360 mm
Hopper opening600 × 500 mm
Main shaft diameter⌀60 mm
Main shafts2 pcs
Rotor blade size⌀180 × 15mm
Rotor / stator blades32 pcs / 32 pcs
Blade materialConfiguration-dependent; confirm rotor and stator blade material on quotation

Drive and published output

Motor power5.5 kW × 1 (7.5 HP × 1)
Motor count1 motor
Motor speed1450 r/min
ReducerK87 reducer
Shaft speed12–20 r/min
Output sizeApprox. 20 mm
Steel throughput≤230 kg/h
Aluminium throughput≤130 kg/h
Copper throughput≤300 kg/h

Operation and maintenance

Operation modeAutomatic Operation
Power supply200–480 V / 3 Ph / 50–60 Hz or customizable
Gear oilApprox. 10 L
Drive couplingFlexible Coupling Drive

Key Features

  • Two-shaft low-speed, high-torque cutting system
  • 2 pcs main shafts at ⌀60 mm
  • 32 pcs rotor blades and 32 pcs stator blades
  • 5.5 kW × 1 (7.5 HP × 1) drive through K87 reducer and flexible couplings
  • Approx. 20 mm nominal output size
  • Automatic Operation

Installation and shipping

Use these figures for early site planning. Confirm access routes, lifting equipment and unloading arrangements against the final released drawing.

Footprint
1610x720mm
Overall dimensions
1,610 × 720 × 1,450 mm
Machine weight
Approx. 500 kg
Container loading
20'DC × 1; 10 machines
Layout note
Allow clear access for feed handling, discharge, maintenance and cutter access.

Customization Options

Voltage

200–480 V / 3 Ph / 50–60 Hz or customizable

Material Handling

Feed and discharge arrangements are selected around the material form and downstream line.

Control

PLC-based automatic and remote-control configurations are confirmed by project.

Processed Materials

Metal chips and small turningsMixed light metal scrapSmall non-ferrous chips

MDSSJ-400 documents

Document requests are fulfilled against the current released edition for the selected configuration.

View all downloads
Series Product Introduction

DSSJ / SSJ Series Product Introduction

Series-level introduction to compact MDSSJ shredders and production SSJ shredders, including feed form, shaft and cutter arrangement, drive selection and downstream integration. The current customer edition is supplied on request.

Language
English
Version
Current released edition
Edition
2026-10-30
Request this document
Technical Datasheet

MDSSJ-400 Technical Datasheet

Current model technical data for the cutting chamber, shaft and blade arrangement, drive, published output, installation and container loading.

Language
English
Version
A/1
Edition
2026-10-30
Download
Operation and Maintenance Manual

DSSJ / SSJ Operation and Maintenance Manual

Operation sequence, safety information, maintenance guidance and common fault procedures for MDSSJ and SSJ shredders.

Language
English / Chinese
Version
Latest released manual
Edition
2026-10-30
Request this document
No-obligation quotation

Request a Quote for the MDSSJ-400

Send your material type and daily tonnage — we'll come back with a recommended configuration and pricing within 24 hours.

Prefer to talk? +86-15950122559

Include these details

  • Material type, form and maximum piece size
  • Bulk density and whether bundles need pre-loosening
  • Required output per hour or per shift
  • Required discharge size and downstream machine
  • Feed and discharge arrangement
  • Available voltage, frequency and connected power
  • Installation footprint, lifting equipment and destination