Material behaviour
Match cover, upper compression and chamber configuration to material bulk and spring-back.
Compact loose scrap metal into dense, uniform bales that maximize transport efficiency and mill value.
Y81 Metal Baler Series
The Y81 family spans conventional side-compression balers, three-direction presses, short Q-series machines and side-tipping designs. Charging chamber, bale size, cover and cylinder arrangement must be read per configuration.

Select the compression direction and ejection method around the material and site.
| Family | Structure | Best fit | Limitations / check first | Model |
|---|---|---|---|---|
| Y81T |
| Light, mixed and springy scrap that benefits from a covered charging chamber and configurable bale formats. | Published base configurations generally accept material under 3–4 mm thick. Chamber, bale, motor, cycle, footprint and loading change by configuration. | Y81T-160 →Y81T-250 →Y81T-315 →Y81T-400 → |
| Y81T2 |
| Regular and less springy scrap where direct top loading, a simpler open chamber and side bale discharge are sufficient. | Y81T2 has no cover or upper ram: two side rams pre-compress the load before the main ram forms the bale. Feed shape and material spring-back matter more, so confirm chamber, bale format and material mix before selection. | Y81T2-125 →Y81T2-160 →Y81T2-200 →Y81T2-250 → |
| Y81T3 |
| Light, bulky or springy material where an upper ram improves charge consolidation and bale stability. | Y81T3 uses two upper pressing rams before the main ram and has no cover. Published Y81T3-250 configurations are generally limited to material under 3 mm thick; confirm spring-back, piece shape and loading method before selection. | Y81T3-250 → |
| Y81Q |
| Compact sites handling regular sheet, light steel and mixed non-ferrous scrap where covered one-direction baling is sufficient. | The main ram both forms and pushes the bale forward. There is no side compression, upper ram or side push-out. Confirm front handling clearance and material thickness before selection. | Y81Q-100 →Y81Q-135 → |
| Y81QC |
| Thin aluminium foil and similar light material where direct top loading and a compact open chamber are preferred. | Y81QC has no cover, side compression or upper ram. Its gate action and material limits are model-specific and must not be inferred from Y81Q. | Model range available |
| Y81F |
| Yards that prefer side-tipping bale discharge and can plan the surrounding handling area. | Y81F uses a cover for the charging chamber and a turning cylinder for side discharge. The turning action changes the installation envelope, so confirm site clearance and bale handling. | Model range available |
These are the inputs our engineers need before recommending a configuration.
Match cover, upper compression and chamber configuration to material bulk and spring-back.
Confirm chamber, finished bale size and handling method before choosing tonnage.
Compare chamber length, cycle time, footprint, loading method and outgoing bale handling before selecting the configuration.
Open a model to see its published configurations, installation data and documents.
Horizontal · side compression + main compression · cover · side push-out
160-ton horizontal metal baler with cover and side push-out, offering 8 published chamber and bale configurations.
250-ton horizontal metal baler with cover and side push-out, offering 8 published chamber and bale configurations.
315-ton horizontal metal baler with cover and side push-out, offering 10 published chamber and bale configurations.
400-ton horizontal metal baler with cover and side push-out, offering 14 published chamber and bale configurations.
Horizontal · side compression + main compression · no cover · side push-out
125-ton horizontal metal baler with open charging chamber, two-way compression and side push-out, offering 8 published chamber and bale configurations.
160-ton horizontal metal baler with open charging chamber, two-way compression and side push-out, offering 5 published chamber and bale configurations.
200-ton horizontal metal baler with open charging chamber, two-way compression and side push-out, offering 3 published chamber and bale configurations.
250-ton horizontal metal baler with open charging chamber, two-way compression and side push-out, offering 8 published chamber and bale configurations.
Horizontal · side + upper + main compression · no cover · side push-out
Horizontal · single-direction main compression · cover · raised gate · front push-out
100-ton horizontal single-direction metal baler with cover, raised gate and front push-out, offering 1 published chamber and bale configuration.
135-ton horizontal single-direction metal baler with cover, raised gate and front push-out, offering 1 published chamber and bale configuration.
Document requests are fulfilled against the current released edition for the selected configuration.
Series-level introduction to Y81 baler structures, compression and discharge methods, material fit and the model selection path. The current customer edition is supplied on request.
Operation sequence, safety information, maintenance guidance and common fault procedures for Y81 metal balers.